This project is super super easy. You could easily bust out one for every table at your wedding, (if you were so inclined), in an afternoon.
You will need:
- X-acto knife and cutting mat or a rotary cutter
- Wooden crate
Step 1: Cut card stock and patterned paper to the size of your box and glue the two pieces together. Or you could glue larger pieces of each together first and cut the finished piece down to size after it’s dry.
If you’re going the “cut first, glue second” route, make sure you’re piece is dry before moving on.
Step 2: Punch holes along one side of your card stock. Make sure the holes are about an inch apart so the cones don’t touch. Repeat on the other side, making sure each hole is aligned with one on the opposite side.
Step 4: Use your choice of glue to stick the holder to the wooden block/crate.